Filter
Top Products
AutoDome Junior HD Installing a Wall Mount | en 41
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
8. Place the Wall Mount flat gasket (item 1, below), between
the surface and Wall Mount; then secure the mount using
four (4) appropriate user-provided fasteners such as Moly
or Toggle bolts. The flat gasket is supplied with the
AutoDome Junior Outdoor Camera.
Figure 5.6 Secure arm to wall with flat gasket
9. Skip to Section 5.1.4 Installing the Camera to the Mounting
Plate, page 41, to continue the installation.
5.1.4 Installing the Camera to the Mounting Plate
To install the camera to the mounting plate, do the following:
1. Attach the mounting plate (supplied with dome) to the
dome mounting cap with the three (3) screws supplied.