Filter
Top Products
60 en | Installing a Recessed Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
12. Loosen the two clamp drive screws (item 1, below) so that
the clamping plates (item 2) move freely.
Figure 6.15 Clamp Drive Screws and Plates
13. Insert the bracket through the hole in the ceiling. Slide
clamps out and down so that the ceiling is captured in
between the clamps and the bracket flange. The ceiling
must have a maximum thickness of 41.7 mm (1.64 in.) and
a minimum thickness of 12.7 mm (0.50 in.).
Figure 6.16 Attach Recess Mount to Ceiling
NOTICE!
If you need to install the VJR-A3-SP Support Bracket, refer to
the guide included with the bracket. Once the bracket is
installed, continue with the next section.