Filter
Top Products
56 en | Installing a Recessed Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
6.3.1 Installation Requirements
– Appropriate straight slot screwdrivers
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall, ceiling tile, or
other materials used in outdoor soffits (if applicable)
– T-10 Torx wrench
– Retaining ring with gasket
(supplied with AutoDome Junior camera kit)
– Three (3) M3 – .5 x 6 Phillips flat head machine screws for
use with the retaining ring
(supplied with AutoDome Junior camera kit)
– VJR-A3-IC54 AutoDome Junior IP54-rated In-ceiling mount
kit (required accessory, sold separately)
– VJR-A3-SP, support kit for VJR-A3-IC54 mounting kit, if
mounting to a drop ceiling (optional accessory)
6.3.2 Preparing the Ceiling for Installation
To mount to a recess mount, do the following:
1. Determine a secure location for the recessed mount.
Figure 6.11 Recess Mount Dimensions
229
(9.0)
145
(5.7)
70
(2.8)
mm
(in.)