Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 137
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
12.22 PTZ Settings
Auto Pan Speed
Continuously pans the camera at a speed between right and left
limit settings. Type a value between 1 and 60 (expressed in
degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until
the inactivity event will be executed.
– Off (default): camera remains on a current scene
indefinitely.
– Scene 1: camera returns to Preset 1.
– Previous Aux: camera returns to the previous activity.
Inactivity Period
Determines the behavior of the dome when the control for
dome is inactive. Select a time period from the pull-down list (3
sec. - 10 min.). The default setting is 2 minutes.
Auto Pivot
The Auto Pivot tilts the camera through the vertical position as
the camera is rotated to maintain the correct orientation of the
image. Set the Auto Pivot to On (default) to automatically
rotate the camera 180º when following a subject traveling
directly beneath the camera. To disable this feature, click Off.
Freeze Frame
Select On (default) to freeze the image while the AutoDome
moves to a predetermined scene position.
Autopan Left Limit
Sets the left Auto Pan limit of the camera. Use the preview
window to move the camera to the left pan limit and click the
button. The camera will not move past this limit when in Auto
Pan Between Limits mode (AUX 2 ON).
Autopan Right Limit
Sets the right Auto Pan limit of the camera. Use the preview
window to move the camera to the right pan limit and click the