Filter
Top Products
28 en | Installing a Surface Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
b. Thread the flat side of the gasket (item 1, below) onto
the recessed side of the retaining ring (item 2). The
illustration below shows a cross-section of the gasket
on the retaining ring.
7. Attach the retaining ring with gasket (item 2, below) to the
Surface Mount Adapter. These parts are supplied with the
AutoDome Junior Outdoor Camera. Ensure that the side of
the retaining ring with the counter-sunk screw holes is
facing you.
Figure 4.6 O-ring and retaining ring placement for outdoor
installation
CAUTION!
You must ensure that the gasket is attached to the retaining
ring as shown above to ensure an environmentally tight seal.