Filter
Top Products
186 en | BVIP Firmware Updates AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
16.2 Beginning the Firmware Update Process
Use this procedure to connect to your AutoDome Junior HD and
to navigate to the Firmware Update page.
1. Launch Internet Explorer and type the IP address for the
AutoDome Junior HD in the Address bar and click Go.
Internet Explorer opens the Livepage view.
2. Click the SETTINGS link, located at the top of the page.
3. Click the Service link in the left pane.
4. Click the Maintenance link below the Service link.
5. Click the Search button and navigate to the firmware file
(*.fw). Then, click OK.
6. Click the Upload button.
7. Click OK to the warning message to continue the firmware
upload, or Cancel to stop the upload.
The page displays a progress bar as the firmware is
uploaded.
Note: Once the progress bar reaches 100% the system
opens the reset page. Allow the reset page to complete its
action.
8. Once the reset is complete the upgrade is complete.