Filter
Top Products
80 en | Preparing the Wiring AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
8.2.2 Power Connections to Heater (all outdoor models)
The heater in an outdoor AutoDome Junior HD unit accepts
power only from a single 24 VAC isolated power connector
(white/red and white/black wires). The heater does not accept
power via Power over Ethernet + (PoE+, IEEE 802.3at, class 4).
Figure 8.2 Power Cable
To connect the power to outdoor unit heaters:
1. Locate the cable assembly with a three (3) pin mating
connector on one end and the white/red and white/black
flying leads on the other end.
2. Connect one lead of the ground or 24 VAC power source to
the white/black wire.
3. Connect one lead of the 24 VAC power source to the
white/red wire.
Ref. # Wire Color
1 24 VAC White/Red
2 24 VAC White/Black
3 User-supplied Power Supply n/a
WARNING!
The heater unit accepts 24 VAC, 2 A power only. Do not connect
120 V or 230 V to this heater.