Filter
Top Products
AutoDome Junior HD Preparing the Wiring | en 81
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
8.3 Ethernet Connection
The AutoDome Junior HD connects to a 10 Base-T/100 Base-TX
network either directly or via a switch. Both video and control
are transmitted over a standard TCP/IP network using the built-
in Web server. In addition, power is supplied to an AutoDome
Junior HD camera via the Ethernet cable compliant with the
Power-over-Ethernet + (IEEE 802.3at, class 4) standard.
NOTICE!
The heater in an outdoor AutoDome Junior HD unit accepts
power only from a 24 VAC power source. The heater cannot be
powered via the Power-over-Ethernet + (IEEE 802.3at, class 4)
standard.
CAUTION!
Ethernet connections must be made to non-exposed (indoor)
networks only.
Cable Type CAT-5E or CAT 6 Ethernet
Maximum Distance 100 m (328 ft)
Bandwidth 10 Base-T/100 Base-TX
PoE+ (indoor models only) IEEE 802.3at, class 4 standard
Terminal Connector RJ45, Female