Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 177
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
Configuration
You can save configuration data for the AutoDome Junior HD on
a computer and then load saved configuration data from a
computer to the unit.
Upload
1. Enter the full path of the file to upload or click Browse to
select the required file.
2. Make certain that the file to be loaded comes from the
same unit type as the unit you want to configure.
3. Next, click Upload to begin transferring the file to the unit.
The progress bar allows you to monitor the transfer.
Once the upload is complete, the new configuration is
activated. The time remaining is shown by the message going to
reset Reconnecting in ... seconds. The unit reboots
automatically once the upload has successfully completed.
Download
1. Click the Download button. A dialog box opens.
2. Follow the on-screen instructions to save the current
settings.
SSL certificate
To be able to work with an SSL encrypted data connection,
both ends of a connection must hold the relevant certificates.
You can upload the SSL certificate, comprising one or multiple
files, onto the AutoDome Junior HD.
If you wish to upload multiple files onto the AutoDome Junior
HD, you must select them consecutively.
1. Enter the full path of the file to upload or click Browse to
select the required file.
2. Next, click Upload to begin transferring the file to the unit.
3. Once all files have been successfully uploaded, the unit
must be rebooted. In the address bar of your browser,
enter /reset after the IP address of the AutoDome Junior
HD (for example 192.168.0.10/reset).
The new SSL certificate is valid.