Filter
Top Products
AutoDome Junior HD Using the IP Interface | en 91
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
– Software:
– Microsoft Internet Explorer, version 9.0 or higher
– Bosch Video Client (BVC)
–DirectX 9.0c
– MPEG-ActiveX 5.20.0045 or newer
– Oracle Java Virtual Machine 1.6.0_26
11.3 Connecting the AutoDome Junior HD to
the PC
1. Install the AutoDome Junior HD according to the
instructions in the AutoDome Junior HD User Manual.
2. Connect an Ethernet cable from the AutoDome Junior HD
RJ45 connector to a dedicated network switch to bypass
the Local Area Network (LAN).
3. Connect the dedicated network switch to the RJ45
connector on the PC (see option A below).
Figure 11.1 AutoDome Junior HD System Configuration
NOTICE!
Ensure the graphics card is set to 16-bit or 32-bit color. If you
need further assistance, contact your PC system administrator.
NOTICE!
The AutoDome Junior HD can also be connected directly to a
PC using an Ethernet crossover cable with RJ45 connectors
(see option B below).