Filter
Top Products
SONICWALL SONICOS ENHANCED 2.5 ADMINISTRATOR’S GUIDE
109
Network > DHCP Server
6
If you select the interface IP address from the Gateway Preferences menu, the Default Gateway
and Subnet Mask fields are unavailable. If you select Other, the fields are available for you to
type the Default Gateway and Subnet Mask information into the fields.
7
Select Allow BOOTP Clients to use Range if you have BOOTP Clients on your network.
BOOTP stands for bootstrap protocol, which is a TCP/IP protocol and service that allows diskless
workstations to obtain their IP address, other TCP/IP configuration information, and their boot
image file from a BOOTP server.
DNS/WINS
1
Click the DNS/WINS tab to continue configuring the DHCP Server feature.
2
If you have a domain name for the DNS server, type it in the Domain Name field.
3
Inherit DNS Settings Dynamically using SonicWALL’s DNS Settings is selected by default.
4
If you do not want to use the SonicWALL security appliance network settings, select Specify
Manually, and type the IP address of your DNS Server in the DNS Server 1 field. You can specify
two additional DNS servers.
5
If you have WINS running on your network, type the WINS server IP address(es) in the WINS
Server 1 field. You can add an additional WINS server.
VoIP Settings
1
.Click on the VoIP Settings tab. The VoIP Settings tab allows you to configure the SonicWALL
DHCP server to send Cisco Call Manager information to VoIP clients on the network.