Filter
Top Products
54
SONICWALL SONICOS ENHANCED 2.5 ADMINISTRATOR’S GUIDE
C
HAPTER
9:
Configuring Interfaces
1
Click on the Notepad icon in the Configure column for Unassigned Interface you want to
configure. The Edit Interface window is displayed.
2
Select the LAN interface. If you want to create a new zone for the interface, select Create a new
zone. The Add Zone window is displayed. See Chapter 11 for instructions on adding a zone.
3
Select Static from the IP Assignment menu.
4
Enter the IP address and subnet mask of the Zone in the IP Address and Subnet Mask fields.
5
Enter any optional comment text in the Comment field. This text is displayed in the Comment
column of the Interface table.
6
If you want to enable remote management of the SonicWALL security appliance from this
interface, select the supported management protocol(s): HTTP, HTTPS, Ping, and/or SNMP.
7
If you want to allow selected users with limited management rights, select HTTP and/or HTTPS in
User Login.
8
Click OK.
Note: The administrator password is required to regenerate encryption keys after changing the
SonicWALL security appliance’s address.