Filter
Top Products
192
SONICWALL SONICOS ENHANCED 2.5 ADMINISTRATOR’S GUIDE
C
HAPTER
32:
Configuring L2TP Server
Configuring the L2TP Server
The VPN > L2TP Server page provides the settings for configuring the SonicWALL security appliance
as a LT2P Server.
To configure the L2TP Server, follow these steps:
1
To enable L2TP Server functionality on the SonicWALL security appliance, select Enable L2TP
Server. Then click Configure to display the L2TP Server Configuration window.
2
Enter the number of seconds in the Keep alive time (secs) field to send special packets to keep
the connection open. The default is 60 seconds.
3
Enter the IP address of your first DNS server in the DNS Server 1 field. If you have a second DNS
server, type the IP address in the DNS Server 2 field.
4
Enter the IP address of your first WINS server in the WINS Server 1 field. If you have a second
WINS server, type the IP address in the WINS Server 2 field.
5
Select IP address provided by RADIUS Server if a RADIUS Server provides IP addressing
information to the L2TP clients.
6
If the L2TP Server provides IP addresses, select Use the Local L2TP IP pool. Enter the range of
private IP addresses in the Start IP and End IP fields. The private IP addresses should be a range
of IP addresses on the LAN.