Filter
Top Products
32
SONICWALL SONICOS ENHANCED 2.5 ADMINISTRATOR’S GUIDE
C
HAPTER
5:
Configuring SonicWALL Security Appliance Administration Settings
enter the IP address in the NAT Device IP Address field. The default VPN policy settings are
displayed at the bottom of the Configure GMS Settings window.
Existing Tunnel - If this option is selected, the GMS server and the SonicWALL security appliance
already have an existing VPN tunnel over the connection. Enter the GMS host name or IP address
in the GMS Host Name or IP Address field. Enter the port number in the Syslog Server Port
field.
HTTPS - If this option is selected, HTTPS management is allowed from two IP addresses: the
GMS Primary Agent and the Standby Agent IP address. The SonicWALL security appliance also
sends encrypted syslog packets and SNMP traps using 3DES and the SonicWALL security
appliance administrator’s password. The following configuration settings for HTTPS management
mode are displayed:
Send Syslog Messages in Cleartext Format - Sends heartbeat messages as cleartext.
Send Syslog Messages to a Distributed GMS Reporting Server - Sends regular heartbeat
messages to both the GMS Primary and Standby Agent IP address. The regular heartbeat
messages are sent to the specified GMS reporting server and the reporting server port.
GMS Reporting Server IP Address - Enter the IP address of the GMS Reporting Server, if the
server is separate from the GMS management server.
GMS Reporting Server Port - Enter the port for the GMS Reporting Server. The default value is
514
7
Click OK.