Filter
Top Products
172
SONICWALL SONICOS ENHANCED 2.5 ADMINISTRATOR’S GUIDE
C
HAPTER
29:
Configuring VPN Policies
Configuring a VPN Policy with IKE using Preshared Secret
To configure a VPN Policy using Internet Key Exchange (IKE), follow the steps below:
1
Click Add on the VPN>Settings page. The VPN Policy window is displayed.
2
In the General tab, select IKE using Preshared Secret from the IPSec Keying Mode menu.
3
Enter a name for the policy in the Name field.
4
Enter the host name or IP address of the remote connection in the IPSec Primary Gateway Name
or Address field.
5
If the Remote VPN device supports more than one endpoint, you may optionally enter a second
host name or IP address of the remote connection in the IPSec Secondary Gateway Name or
Address field.
6
Enter a Shared Secret password to be used to setup the Security Association the Shared Secret
field. The Shared Secret must be at least 4 characters long, and should comprise both numbers
and letters.
Optionally, specify a Local IKE ID (optional) and Peer IKE ID (optional) for this Policy. By
default, the IP Address (ID_IPv4_ADDR) is used for Main Mode negotiations, and the SonicWALL
Identifier (ID_USER_FQDN) is used for Aggressive Mode.
7
Click the Network tab.