Filter
Top Products
Chapter 8 Route
ZyWALL (ZLD) CLI Reference Guide
103
[no] source {address6_object|any} Sets the source IPv6 IP address that the matched packets must have.
The no command resets the source IP address to the default (any). any
means all IP addresses.
[no] user user_name Sets the user name. The no command resets the user name to the
default (any). any means all users.
[no] policy controll-ipsec-dynamic-rules
activate
Enables the ZyWALL to use policy routes to manually specify the
destination addresses of dynamic IPSec rules. You must manually
create these policy routes. The ZyWALL automatically obtains source
and destination addresses for dynamic IPSec rules that do not match
any of the policy routes.
The no command has the ZyWALL automatically obtain source and
destination addresses for all dynamic IPSec rules.
policy default-route Enters the policy-route sub-command mode to set a route with the
name “default-route”.
policy delete policy_number Removes a routing policy.
policy flush Clears the policy routing table.
policy list table Displays all policy route settings.
policy move policy_number to policy_number Moves a routing policy to the number that you specified.
[no] policy override-direct-route activate Has the ZyWALL forward packets that match a policy route according
to the policy route instead of sending the packets to a directly
connected network. Use the no command to disable it.
[no] policy controll-virtual-server-rules
activate
Gives policy routes priority over NAT virtual server rules (1-1 SNAT).
Use the no command to give NAT virtual server rules priority over
policy routes.
[no] policy6 override-direct-route
activate
Has the ZyWALL forward IPv6 packets that match a policy route
according to the policy route instead of sending the packets to a
directly connected network. Use the no command to disable it.
show bwm activation Displays whether or not the global setting for bandwidth management
on the ZyWALL is enabled.
show bwm-usage < [policy-route
policy_number] | [interface
interface_name]
Displays the specified policy route or interface’s bandwidth allotment,
current bandwidth usage, and bandwidth usage statistics.
show policy-route [policy_number] Displays all or specified policy route settings.
show policy-route begin <1..200> end
<1..200>
Displays the specified range of policy route settings.
show policy-route controll-ipsec-dynamic-
rules
Displays whether the ZyWALL checks policy routes first before IPSec
dynamic rules.
show policy-route override-direct-route Displays whether or not the ZyWALL forwards packets that match a
policy route according to the policy route instead of sending the
packets to a directly connected network.
show policy-route controll-virtual-server-
rules
Displays whether or not policy routes have priority over NAT virtual
server rules (1-1 SNAT).
show policy-route6 override-direct-route Displays whether or not the ZyWALL forwards IPv6 packets that match
a policy route according to the policy route instead of sending the
packets to a directly connected network.
show policy-route rule_count Displays the number of policy routes that have been configured on the
ZyWALL.
show policy-route underlayer-rules Displays all policy route rule details for advanced debugging.
Table 44 Command Summary: Policy Route (continued)
COMMAND DESCRIPTION