Filter
Top Products
Chapter 37 System
ZyWALL (ZLD) CLI Reference Guide
282
37.4.1 Date/Time Commands
The following table describes the commands available for date and time setup. You must use the
configure terminal command to enter the configuration mode before you can use these
commands.
37.5 Console Port Speed
This section shows you how to set the console port speed when you connect to the ZyWALL via the
console port using a terminal emulation program. The following table describes the console port
commands.
You must use the configure terminal command to enter the configuration mode
before you can use these commands.
Table 166 Command Summary: Date/Time
COMMAND DESCRIPTION
clock date yyyy-mm-dd time hh:mm:ss Sets the new date in year, month and day format
manually and the new time in hour, minute and second
format.
[no] clock daylight-saving Enables daylight saving. The
no command disables
daylight saving.
[no] clock saving-interval begin
{apr|aug|dec|feb|jan|jul|jun|mar|may|nov|oct|sep}
{1|2|3|4|last} {fri|mon|sat|sun|thu|tue|wed} hh:mm
end {apr|aug|dec|feb|jan|jul|jun|mar|may|nov|oct|sep}
{1|2|3|4|last} {fri|mon|sat|sun|thu|tue|wed} hh:mm
offset
Configures the day and time when Daylight Saving Time
starts and ends. The
no command removes the day and
time when Daylight Saving Time starts and ends.
offset: a number from 1 to 5.5 (by 0.5 increments)
clock time hh:mm:ss Sets the new time in hour, minute and second format.
[no] clock time-zone {-|+hh} Sets your time zone. The
no command removes time
zone settings.
[no] ntp Saves your date and time and time zone settings and
updates the data and time every 24 hours. The
no
command stops updating the data and time every 24
hours.
[no] ntp server {fqdn|w.x.y.z} Sets the IP address or URL of your NTP time server. The
no command removes time server information.
ntp sync Gets the time and date from a NTP time server.
show clock date Displays the current date of your ZyWALL.
show clock status Displays your time zone and daylight saving settings.
show clock time Displays the current time of your ZyWALL.
show ntp server Displays time server settings.
Table 167 Command Summary: Console Port Speed
COMMAND DESCRIPTION
[no] console baud baud_rate Sets the speed of the console port. The no command resets the console port
speed to the default (115200).
baud_rate: 9600, 19200, 38400, 57600 or 115200.
show console Displays console port speed.