ZyXEL Communications 3.1 Security Camera User Manual


 
ZyWALL (ZLD) CLI Reference Guide 276
CHAPTER 36
DHCPv6 Objects
This chapter describes how to configure and view DHCPv6 request and lease objects.
36.1 DHCPv6 Object Commands Summary
The following table identifies the values required for many DHCPv6 object commands. Other input
values are discussed with the corresponding commands.
The following sections list the DHCPv6 object commands.
36.1.1 DHCPv6 Object Commands
This table lists the commands for creating endpoint security objects. Use the configure
terminal
command to enter the configuration mode to be able to use the commands that
configure settings.
Table 162 DHCPv6 Object Command Input Values
LABEL DESCRIPTION
dhcp6_profile The name of a DHCPv6 request object. Use a string of less than 31 characters.
interface_name The name of the interface. This depends on the ZyWALL model.
For the USG 300 and above, use gex, x = 1 ~ N, where N equals the highest numbered
Ethernet interface for your ZyWALL model.
For the ZyWALL USG 200 and below, use a name such as wan1, wan2, opt, lan1, ext-
wlan, or dmz.
Table 163 DHCPv6 Object Commands
COMMAND DESCRIPTION
show ipv6 dhcp6 binding Displays the server side IPv6/DUID binding lease.
show dhcp6 interface Displays all DHCPv6 server, client and relay interfaces.
show dhcp6-lease-object [dhcp6_profile] Displays the specified DHCPv6 lease object or all of them.
show dhcp6 object-binding interface_name Displays the DHCPv6 object bound to the specified interface.
show dhcp6-request-object [dhcp6_profile] Displays the specified DHCPv6 request object or all of them.
dhcp6-lease-object dhcp6_profile address
ipv6_addr duid duid
Creates or edits the specified DHCP lease object with the
specified IPv6 address and DHCP Unique IDentifier (DUID).
dhcp6-lease-object dhcp6_profile prefix-
delegation ipv6_addr_prefix duid duid
Creates or edits the specified pre-fix delegation DHCP lease
object with the specified IPv6 address prefix and DUID.
dhcp6-lease-object dhcp6_profile address-pool
ipv6_addr ipv6_addr
Creates or edits the specified DHCP lease object address pool
with the specified IPv6 address range.