Filter
Top Products
ZyWALL (ZLD) CLI Reference Guide 151
CHAPTER 18
SSL VPN
This chapter shows you how to set up secure SSL VPN access for remote user login.
18.1 SSL Access Policy
An SSL access policy allows the ZyWALL to perform the following tasks:
• limit user access to specific applications or files on the network.
• allow user access to specific networks.
• assign private IP addresses and provide DNS/WINS server information to remote users to access
internal networks.
18.1.1 SSL Application Objects
SSL application objects specify an application type and server that users are allowed to access
through an SSL tunnel. See Chapter 34 on page 266 for how to configure SSL application objects.
18.1.2 SSL Access Policy Limitations
You cannot delete an object that is used by an SSL access policy. To delete the object, you must
first unassociate the object from the SSL access policy.
18.2 SSL VPN Commands
The following table describes the values required for some SSL VPN commands. Other values are
discussed with the corresponding commands.
Table 77 Input Values for SSL VPN Commands
LABEL DESCRIPTION
profile_name The descriptive name of an SSL VPN access policy. You may use up to 31 characters
(“a-z”, A-Z”, “0-9”) with no spaces allowed.
address_object The name of an IP address (group) object. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a number.
This value is case-sensitive.
application_object The name of an SSL application object. You may use up to 31 characters (“0-9”, “a-z”,
“A-Z”, “-” and “_”). No spaces are allowed.