Filter
Top Products
Chapter 9 Routing Protocol
ZyWALL (ZLD) CLI Reference Guide
109
9.2.3 OSPF Area Commands
This table lists the commands for OSPF areas.
9.2.4 Virtual Link Commands
This table lists the commands for virtual links in OSPF areas.
Table 51 router Commands: OSPF Areas
COMMAND DESCRIPTION
router ospf Enters sub-command mode.
[no] network interface area IP Adds the specified interface to the specified area. The no
command removes the specified interface from the
specified area.
[no] area IP [{stub | nssa}] Creates the specified area and sets it to the indicated type.
The
no command removes the area.
[no] area IP authentication Enables text authentication in the specified area. The no
command disables authentication in the specified area.
[no] area IP authentication message-
digest
Enables MD5 authentication in the specified area. The
no
command disables authentication in the specified area.
[no] area IP authentication
authentication-key authkey
Sets the password for text authentication in the specified
area. The
no command clears the password.
[no] area IP authentication message-
digest-key <1..255> md5 authkey
Sets the MD5 ID and password for MD5 authentication in
the specified area. The
no command clears the MD5 ID and
password.
Table 52 router Commands: Virtual Links in OSPF Areas
COMMAND DESCRIPTION
show ospf area IP virtual-link Displays information about virtual links for the specified area.
router ospf
[no] area IP virtual-link IP Creates the specified virtual link in the specified area. The
no
command removes the specified virtual link.
[no] area IP virtual-link IP authentication Enables text authentication in the specified virtual link. The
no
command disables authentication in the specified virtual link.
[no] area IP virtual-link IP authentication
message-digest
Enables MD5 authentication in the specified virtual link. The
no
command disables authentication in the specified virtual link.
[no] area IP virtual-link IP authentication
authentication-key authkey
Sets the password for text authentication in the specified virtual
link. The
no command clears the password in the specified
virtual link.
[no] area IP virtual-link IP authentication
message-digest-key <1..255> md5 authkey
Sets the MD5 ID and password for MD5 authentication in the
specified virtual link. The
no command clears the MD5 ID and
password in the specified virtual link.
[no] area IP virtual-link IP authentication
same-as-area
Sets the virtual link’s authentication method to the area’s default
authentication.
[no] area IP virtual-link IP
authentication-key authkey
Sets the password for text authentication in the specified virtual
link. The
no command clears the password.
area IP virtual-link IP message-digest-key
<1..255> md5 authkey
Sets the MD5 ID and password for MD5 authentication in the
specified virtual link.
no area IP virtual-link IP message-digest-
key <1..255>
Clears the MD5 ID in the specified virtual link.