Filter
Top Products
Chapter 38 System Remote Management
ZyWALL (ZLD) CLI Reference Guide
292
38.7.2 FTP Commands Examples
This command sets a service control rule that allowed the computers with the IP addresses
matching the specified address object to access the specified zone using FTP service.
This command displays FTP settings.
38.8 SNMP
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your ZyWALL supports SNMP agent functionality, which allows a manager
station to manage and monitor the ZyWALL through the network. The ZyWALL supports SNMP
version one (SNMPv1) and version two (SNMPv2c).
38.8.1 Supported MIBs
The ZyWALL supports MIB II that is defined in RFC-1213 and RFC-1215. The ZyWALL also supports
private MIBs (zywall.mib and zyxel-zywall-ZLD-Common.mib) to collect information about CPU and
memory usage and VPN total throughput. The focus of the MIBs is to let administrators collect
statistical data and monitor status and performance. You can download the ZyWALL’s MIBs from
www.zyxel.com.
38.8.2 SNMP Traps
The ZyWALL will send traps to the SNMP manager when any one of the following events occurs:
Router# configure terminal
Router(config)# ip ftp server rule 4 access-group Sales zone WAN action accept
Router# configure terminal
Router(config)# show ip ftp server status
active : yes
port : 21
certificate: default
TLS : no
service control:
No. Zone Address Action
========================================================================
Table 175 SNMP Traps
OBJECT LABEL OBJECT ID DESCRIPTION
Cold Start 1.3.6.1.6.3.1.1.5.1 This trap is sent when the ZyWALL is turned on or an agent
restarts.
linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is down.
linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
authenticationFailure 1.3.6.1.6.3.1.1.5.5 This trap is sent when an SNMP request comes from non-
authenticated hosts.