Filter
Top Products
Chapter 21 Anti-Virus
ZyWALL (ZLD) CLI Reference Guide
175
anti-virus rule <1..32> Enters the anti-virus sub-command mode to edit the specified direction
specific rule.
[no] activate Turns a direction specific anti-virus rule on or off.
[no] log [alert] Sets the ZyWALL to create a log (and optionally an alert) when packets
match this rule and are found to be virus-infected. The
no command
sets the ZyWALL not to create a log or alert when packets match this
rule.
[no] from zone_object Sets the zone on which the packets are received. The
no command
removes the zone on which the packets are received and resets it to the
default (any). any means all interfaces or VPN tunnels.
[no] to zone_object Sets the zone to which the packets are sent. The
no command removes
the zone to which the packets are sent and resets it to the default
(any). any means all interfaces or VPN tunnels.
[no] scan {http | ftp | imap4 | smtp
| pop3}
Sets the protocols of traffic to scan for viruses.
[no] infected-action {destroy | send-
win-msg}
Sets the action to take when the ZyWALL detects a virus in a file. The
file can be destroyed (filled with zeros from the point where the virus
was found). The ZyWALL can also send a message alert to the file’s
intended user using a Microsoft Windows computer connected to the to
interface.
[no] bypass {white-list | black-list} Have the ZyWALL not check files against a pattern list.
[no] file-decompression [unsupported
destroy]
Enable file decompression to have the ZyWALL attempt to to
decompress zipped files for further scanning. You can also have it
destroy the zipped files it cannot decompress due to encryption or
system resource limitations.
show [all] Displays the details of the anti-virus rule you are configuring or all the
rules.
anti-virus rule move <1..32> to <1..32> Moves a direction specific anti-virus rule to the number that you
specified.
anti-virus rule delete <1..32> Removes a direction specific anti-virus rule.
Table 93 Commands for Zone to Zone Anti-Virus Rules (continued)
COMMAND DESCRIPTION