Filter
Top Products
Chapter 20 Application Patrol
ZyWALL (ZLD) CLI Reference Guide
164
The following sections list the application patrol commands.
20.2.1 Pre-defined Application Commands
This table lists the commands for each pre-defined application.
20.2.2 Rule Commands for Pre-defined Applications
This table lists the commands for rules in each pre-defined application.
zone_name The name of a zone. You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
schedule_name The name of a schedule. You may use 1-31 alphanumeric characters, underscores(
_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
Table 81 Input Values for Application Patrol Commands (continued)
LABEL DESCRIPTION
Table 82 app Commands: Pre-Defined Applications
COMMAND DESCRIPTION
[no] app protocol_name activate Enables application patrol for the specified application. The no
command disables application patrol for the specified application.
[no] app protocol_name allowport <1..65535> If the default action is drop or reject. Adds the specified port to the
list of ports that are forwarded in spite of the default action. The
no
command removes the specified port from the list.
app protocol_name bandwidth <0..102400> Specifies the bandwidth limit (in kilobits per second) for the specified
application.
bandwidth-graph
[no] app protocol_name bwm Turns on bandwidth management for the specified application. The
no command turns off bandwidth management for the specified
application.
[no] app protocol_name defaultport
<1..65535>
For port-base applications. Adds the specified port to the list of ports
used to identify the specified application. This port number can only
be included in one application’s list. The
no command removes the
specified port from the list.
app protocol_name {forward | drop | reject} Specifies what action the ZyWALL should take when it identifies this
application.
app protocol_name mode {portless | portbase} Specifies how the ZyWALL identifies this application.
[no] app protocol_name log [alert] Creates log entries (and alerts) for the specified application. The
no
command does not create any log entries.
Table 83 app Commands: Rules in Pre-Defined Applications
COMMAND DESCRIPTION
app protocol_name rule insert rule_number Creates a new rule at the specified row and enters sub-command
mode. See Table 84 on page 165 for the sub-commands.
app protocol_name rule append Creates a new rule, appends it to the end of the list, and enters sub-
command mode. See Table 84 on page 165 for the sub-commands.
app protocol_name rule rule_number
or
app protocol_name rule modify rule_number
Enters sub-command mode for editing the rule at the specified row.
See Table 84 on page 165 for the sub-commands.