Filter
Top Products
Chapter 30 AAA Server
ZyWALL (ZLD) CLI Reference Guide
251
30.2.3 radius-server Commands
The following table lists the radius-server commands you use to set the default RADIUS server.
30.2.4 radius-server Command Example
The following example sets the secret key and timeout period of the default RADIUS server
(172.23.10.100) to “87643210” and 80 seconds.
30.2.5 aaa group server ad Commands
The following table lists the aaa group server ad commands you use to configure a group of
AD servers.
Table 149 radius-server Commands
COMMAND DESCRIPTION
show radius-server Displays the default RADIUS server settings.
[no] radius-server host
radius_server auth-port auth_port
Sets the RADIUS server address and service port number. Enter the IP address
(in dotted decimal notation) or the domain name of a RADIUS server. The
no
command clears the settings.
[no] radius-server key secret Sets a password (up to 15 alphanumeric characters) as the key to be shared
between the RADIUS server and the ZyWALL. The
no command clears this
setting.
[no] radius-server timeout time Sets the search timeout period (in seconds). Enter a number between 1 and
300. The
no command clears this setting.
Router# configure terminal
Router(config)# radius-server host 172.23.10.100 auth-port 1812
Router(config)# radius-server key 876543210
Router(config)# radius-server timeout 80
Router(config)# show radius-server
host : 172.23.10.100
authentication port: 1812
key : 876543210
timeout : 80
Router(config)#
Table 150 aaa group server ad Commands
COMMAND DESCRIPTION
clear aaa group server ad [group-name] Deletes all AD server groups or the specified AD server group.
Note: You can NOT delete a server group that is currently in use.
show aaa group server ad group-name Displays the specified AD server group settings.
[no] aaa group server ad group-name Sets a descriptive name for an AD server group. Use this command to enter
the sub-command mode.
The
no command deletes the specified server group.
aaa group server ad rename group-name
group-name
Changes the descriptive name for an AD server group.
aaa group server ad group-name Enter the sub-command mode to configure an AD server group.
[no] case-sensitive Specify whether or not the server checks the username case. Set this to be
the same as the server’s behavior.