Filter
Top Products
Chapter 26 User/Group
ZyWALL (ZLD) CLI Reference Guide
231
26.2.2 User Group Commands
This table lists the commands for groups.
26.2.3 User Setting Commands
This table lists the commands for user settings, except for forcing user authentication.
username username [no] logon-lease-time
<0..1440>
Sets the lease time for the specified user. Set it to zero to set
unlimited lease time. The
no command sets the lease time to
five minutes (regardless of the current default setting for new
users).
username username [no] logon-re-auth-time
<0..1440>
Sets the reauthorization time for the specified user. Set it to
zero to set unlimited reauthorization time. The
no command
sets the reauthorization time to thirty minutes (regardless of
the current default setting for new users).
Table 133 username/groupname Commands Summary: Users (continued)
COMMAND DESCRIPTION
Table 134 username/groupname Commands Summary: Groups
COMMAND DESCRIPTION
show groupname [groupname] Displays information about the specified user group or about all user groups
set up in the ZyWALL.
[no] groupname groupname Creates the specified user group if necessary and enters sub-command
mode. The
no command deletes the specified user group.
[no] description description Sets the description for the specified user group. The no command clears
the description for the specified user group.
[no] groupname groupname Adds the specified user group (second groupname) to the specified user
group (first groupname).
[no] user username Adds the specified user to the specified user group.
show Displays information about the specified user group.
groupname rename groupname groupname Renames the specified user group (first groupname) to the specified group-
name (second groupname).
Table 135 username/groupname Commands Summary: Settings
COMMAND DESCRIPTION
show users default-setting {all | user-type
{admin|user|guest|limited-admin|ext-user|
ext-group-user}}
Displays the default lease and reauthentication times for the
specified type of user accounts.
users default-setting [no] logon-lease-time
<0..1440>
Sets the default lease time (in minutes) for each new user. Set it to
zero to set unlimited lease time. The
no command sets the default
lease time to five.
users default-setting [no] logon-re-auth-time
<0..1440>
Sets the default reauthorization time (in minutes) for each new
user. Set it to zero to set unlimited reauthorization time. The
no
command sets the default reauthorization time to thirty.
users default-setting [no] user-type <admin
|ext-user|guest|limited-admin|user|ext-group-
user>
Sets the default user type for each new user. The
no command sets
the default user type to user.
users default-setting [no] user-type <admin
|ext-user|guest|limited-admin|user|ext-group-
user> logon-lease-time <0..1440>
Sets the default lease time (in minutes) for each type of new user.
Set it to zero for unlimited lease time. The
no command sets the
default lease time to five.