Filter
Top Products
Chapter 39 File Manager
ZyWALL (ZLD) CLI Reference Guide
301
Line 3 in the following example exits sub command mode.
Lines 1 and 3 in the following example are comments and line 4 exits sub command mode.
Lines 1 and 2 are comments. Line 5 exits sub command mode.
39.2.2 Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the ZyWALL processes the file line-by-line.
The ZyWALL checks the first line and applies the line if no errors are detected. Then it continues
with the next line. If the ZyWALL finds an error, it stops applying the configuration file or shell script
and generates a log.
You can change the way a configuration file or shell script is applied. Include
setenv stop-on-
error off
in the configuration file or shell script. The ZyWALL ignores any errors in the
configuration file or shell script and applies all of the valid commands. The ZyWALL still generates a
log for any errors.
39.2.3 ZyWALL Configuration File Details
You can store multiple configuration files on the ZyWALL. You can also have the ZyWALL use a
different configuration file without the ZyWALL restarting.
• When you first receive the ZyWALL, it uses the system-default.conf configuration file of default
settings.
• When you change the configuration, the ZyWALL creates a startup-config.conf file of the
current configuration.
• The ZyWALL checks the startup-config.conf file for errors when it restarts. If there is an error
in the startup-config.conf file, the ZyWALL copies the startup-config.conf configuration file
to the startup-config-bad.conf configuration file and tries the existing lastgood.conf
configuration file.
interface ge1
ip address dhcp
!
!
interface ge1
# this interface is a DHCP client
!
! this is from Joe
# on 2006/06/05
interface ge1
ip address dhcp
!