Filter
Top Products
Chapter 6 Interfaces
ZyWALL (ZLD) CLI Reference Guide
64
[no] host ip Specifies the static IP address the ZyWALL should assign. Use this
command, along with
hardware-address, to create a static
DHCP entry.
Note: The IP address must be in the same subnet as the interface to
which you plan to bind the DHCP pool.
When this command is used, the ZyWALL treats this DHCP pool like a
static entry, regardless of the
network setting. The no command
clears this field.
[no] hardware-address mac_address Reserves the DHCP pool for the specified MAC address. Use this
command, along with
host, to create a static DHCP entry. The no
command clears this field.
[no] client-identifier mac_address Specifies the MAC address that appears in the DHCP client list. The
no command clears this field.
[no] client-name host_name Specifies the host name that appears in the DHCP client list. The no
command clears this field.
host_name: You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Use the following commands to create a pool of IP addresses. These
commands have no effect if you use the
host command. You can
still set them, however.
dhcp-option <1..254> option_name
{boolean <0..1>| uint8 <0..255> |
uint16 <0..65535>
| uint32 <0..4294967295> | ip ipv4 [
ipv4 [ ipv4]] | fqdn fqdn [ fqdn [
fqdn]] | text text | hex hex | vivc
enterprise_id hex_s [enterprise_id
hex_s ] | vivs enterprise_id hex_s
[enterprise_id hex_s ]
Adds or edits a DHCP extended option for the specified DHCP pool.
text: String of up to 250 characters
hex: String of up to 250 hexadecimal pairs.
vivc: Vendor-Identifying Vendor Class option. A DHCP client may use
this option to unambiguously identify the vendor that manufactured
the hardware on which the client is running, the software in use, or
an industry consortium to which the vendor belongs.
enterprise_id: Number <0..4294967295>.
hex_s: String of up to 120 hexadecimal pairs.
vivs: Vendor-Identifying Vendor-Specific option. DHCP clients and
servers may use this option to exchange vendor-specific information.
no dhcp-option <1..254> Removes the DHCP extended option for the specified DHCP pool.
network IP/<1..32>
network ip mask
no network
Specifies the IP address and subnet mask of the specified DHCP pool.
The subnet mask can be written in w.x.y.z format or in /<1..32>
format.
Note: The DHCP pool must have the same subnet as the interface to
which you plan to bind it.
The no command clears these fields.
[no] default-router ip Specifies the default gateway DHCP clients should use. The no
command clears this field.
[no] description description Specifies a description for the DHCP pool for identification. The no
command removes the description.
[no] domain-name domain_name Specifies the domain name assigned to DHCP clients. The no
command clears this field.
Table 17 interface Commands: DHCP Settings (continued)
COMMAND DESCRIPTION