Filter
Top Products
Chapter 46 Maintenance Tools
ZyWALL (ZLD) CLI Reference Guide
345
• IP address: any
•Host IP: any
• Host port: any (then you do not need to configure this setting)
• File suffix: Example
• File size: 10 megabytes
• Duration: 150 seconds
• Save the captured packets to: USB storage device
• Use the ring buffer: no
• The maximum size of a packet capture file: 100 megabytes
Exit the sub-command mode and have the ZyWALL capture packets according to the settings you
just configured.
Manually stop the running packet capturing.
Check current packet capture status and list all stored packet captures.
You can use FTP to download a capture file. Open and study it using a packet analyzer tool (for
example, Ethereal or Wireshark).
Router(config)# packet-capture configure
Router(packet-capture)# iface add wan1
Router(packet-capture)# ip-type any
Router(packet-capture)# host-ip any
Router(packet-capture)# file-suffix Example
Router(packet-capture)# files-size 10
Router(packet-capture)# duration 150
Router(packet-capture)# storage usbstorage
Router(packet-capture)# ring-buffer disable
Router(packet-capture)# split-size 100
Router(packet-capture)#
Router(packet-capture)# exit
Router(config)# packet-capture activate
Router(config)#
Router(config)# no packet-capture activate
Router(config)#
Router(config)# show packet-capture status
capture status: off
Router(config)# dir /packet_trace
File Name Size Modified Time
===========================================================================
wan1-Example.cap 575160 2009-11-24 09:06:59
Router(config)#