Filter
Top Products
42 Ion Operations Manual
Playback Status Display
The playback status display allows you to view a range of cues in the current cue list, all cue
attributes for those cues, and a view of the fader configurations for 10 pages of 10 faders each (for
a total of 100 visible faders.
Holding down [Time], while a cue is fading, will display the cue category times counting down in the
cue list display area. The default action is to show the total time not the countdown. To always show
the countdown, a {PSD Time Countdown} option is available in Setup, see {Displays}, page 107.
When the {PSD Time Countdown} is enabled, the cue category times will countdown as a cue is
fading. To see the total time, hold down the [Time] key. {PSD Time Countdown} is “disabled” by
default.
When focus is on the playback status display, you can use the paging keys to navigate in the
display. An optional command line for the playback status display is available. The optional
command line must be enabled to use. See “{Displays}” on page 107.
There are three formats for the playback status display. By default, it will be an expanded cue list
format. With the playback status display selected, press [Format] to toggle between the formats.
Expanded Cue List Format
Pressing [Format] with the playback status display active will access this format. In expanded cue
list, the view of the active cue list increases to the full size of the display. The current fader page is
still visible at the bottom of the screen.
Fader page
number
Fader numbers
Sneak Counter