Filter
Top Products
2- 42
Adjusting the Height of the Printhead
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Aligning the Printhead
After the printhead height has been adjusted, on the printer
operation panel adjust select Auto Head Adj. > Standard
Adj. to adjust the printhead.“Aligning the Printhead”
(→ P.4-40)
Re-adjusting Printhead Height
After the print job is finished, especially before starting the
next print with another type of media, you must do the
procedure to reset the printhead height adjustment lever to
the optimum position for the next media.
“Adjusting Printhead Height” (→ P.2-40)
After re-adjusting the printhead height position, you should
once again use the operation panel to align the printhead.
“Aligning the Printhead” (→ P. 4- 4 0)