Filter
Top Products
1- 37
Printer Driver
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Page Setup Sheet
The Page Setup sheet provides the following settings.
Page Size
Sets the size of the page for the print
data.
Borderless
Printing
Prints the image with no margin at the
four edges of the sheet. There are
limitations on the width and type of
media. (→ P.2- 4, P. 3 -1 3 , P. 3 - 7 7)
Enlarged/
Reduced
Printing
Allows you to enlarge or reduce printing.
You can select one of the following
methods to do this.
Fit Media
Size
Automatically sets the enlargement/
reduction proportionally to match the
size selected for the Media Size.
Fit Roll
Paper Width
Automatically sets the enlargement/
reduction proportionally to match the
size selected for the Roll Paper Width.
Scaling
Allows you to scale the size of the image
manually in the range 5% to 600%.
Media Size
Allows you to specify the actual size of
the media where the job will print.
Orientation
Allows you to select either portrait or
landscape printing.
Rotate Page 90
degrees
(Conserve
Paper)
Automatically rotates the image 90
degrees when print job would result in a
printout with the length smaller than the
width. This saves paper.
Media Source
Specifies whether roll media, roll media
(banner), or cut sheets will be used.
Roll Paper
Width
Specifies the width of the roll paper to be
used.
Auto Cut...
Specifies whether the sheet is cut after
printing.
Size Options
Allows you to define free sizes other
than the standard sizes so you can print
do long prints.