Filter
Top Products
5- 41
NetWare Settings (Windows)
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
3
Select Network in the Device Manager
menu on the left.
The Network page appears.
4
Click the Edit... button to the right of
NetWare.
The Edit IPX/SPX Protocol Settings page appears.
5
Check the Frame Type box and make sure
the setting is correct for your NetWare
network.
6
If you intend to use the burst mode, select
On for NCP Burst Mode.
Note
z The burst mode is used in the queue server mode to
transfer data rapidly at very high speed during printing.
z Normally, leave the setting on.