Filter
Top Products
5- 27
Macintosh Network Settings
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
4
To perform the AppleTalk protocol settings,
click the Edit... button to the right of
AppleTalk.
The Edit AppleTalk Protocol Settings page is
displayed.
If connected with the IP Print (Auto) (Mac OS 8.6/
9x) function or Zeroconf Mac OS X function, go to
the Step 9.
5
For Phase Type, select Phase 2.
Note
z If Disabled is selected, the printer will not be
recognized on the AppleTalk network.
6
For Name enter the name of the printer on
the network.
Enter the printer name displayed in Chooser (Mac
OS 8.6/9.x) or the name displayed in Setup Utility
(Print Center) (Mac OS X).
Important
z If more than one printer is in the same zone, be sure to
assign a unique name for each printer.
Note
z The initial (default) network interface name is Canon
NB 15FB (xxxxxx). Where xxxxxx is the 6-digit MAC
address of the printer.