Filter
Top Products
3- 78
Printing from Macintosh
トップ
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
TOP
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Borderless Printing
This section describes the borderless printing procedure.
<To perform borderless printing on media the same size as the original>
1
Create the original in the software application so it matches the size of the media used for printing.
Important
z The following page size settings can be used for borderless printing. Refer to the table below when you create the
original image and set the page for a size that can be used for borderless printing.
z If the media size was pre-selected in the software application, the selected size must support Borderless Printing.
Note
z Make sure the image created for borderless printing covers the entire original page.
2
From the File menu of the software application select Print to display the Print dialog box.
Borderless printing on media the
same size as the original
document
ISO A1, ISO A2, JIS B2, JIS B3, ANSI Legal, ARCH D, ARCH C, 20”x24”,
14”x17”, 10”x12”, 10”x15”, 8”x10”, US Photo (16”x20”)
Borderless printing with
enlargement and reduction
All page sizes