Filter
Top Products
5- 24
Macintosh Network Settings
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
z For Mac OS X
Confirm the TCP/IP settings at Network under System
Preferences.
Important
z If the computer is connected to the printer with
Zeroconf, then the computer and the printer must be
connected to the same network as the router. The
computer cannot be connected with the Zeroconf
function through the router to a printer on another
network. For more details about network settings,
please contact your network system administrator.
z If the DHCP server cannot be recognized when Using
DHCP is selected, then 169.254.xxx.xxx is set as the
Link Local Address.
1
Open Network under System Preferences.
2
At the Show setting select Built-in Ethernet.
3
Select the TCP/IP panel and confirm the
enabled IP address, subnet mask, and router
settings.
4
Close Network to save the settings.
This completes the TCP/IP network settings for a Macin-
tosh.