Canon W6400 Digital Camera User Manual


 
2- 21
Media You Can Use
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
z Cut Sheets
Important
z The print quality or the precision of line feed may
deteriorate at the top margin of the media, or the
surface of the print may appear scratchy. Also, ink may
stick to the top and bottom edges. If the printhead is
scratching the surface of the media, raise the
printhead to a higher position. (P. 2 -40)
z When loading cut sheets that are longer than 914 mm
(36”), the trailing edge of the sheet will touch the floor
and may become dirty. Before such a long cut sheet,
before you start the print job remove the roll holder and
spread a cloth or some paper on the floor, or when the
cut sheet starts to feed tuck the trailing edge into the
output stacker. (P. 2- 39 )
Printable
Media Size
ARCH D to 8 x 10 Standard Sizes, and
203.2 x 203.2 mm to 609.6 x 1400 mm
Custom Sizes
Printable Type All media types
Printable Area
Printing possible inside the area 5 mm in from the top, left and
right area margins, and 23 mm in from the bottom margin.
Media to Load
Data created the same size as cut sheet.
Print Data and
Results
Data created the same size as Media Size.
5 mm5 mm
5 mm
23 mm
Print Area
Media Size
Media Size
Cut Sheet
Size to
Load
Original data the
same as the media
Print Results