Filter
Top Products
1- 41
Printing
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
On the Main and Page Setup sheets, select the
Media Type, Media Source, Print Quality, Color
Settings, and Scaling settings for the print job.
The print job starts.
Important
z As soon as each sheet prints, remove it from the
output stacker.
Note
z If the printer estimates that there is not enough ink
available to perform a very long print or print several
copies of the same document, it will issue the “Not
Enough Ink” alert on the operation panel. In this case,
replace the ink tank where the ink supply is low and
print again. However, if you reinstall and use an ink
tank that is nearly empty this could cause print quality
to deteriorate. Never try to reinstall an ink tank once
you see the mark in the ink level display.