Filter
Top Products
1- 22
Function Menus
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Skew Check Lv. Standard*, Loose, Off When you are printing on Japanese washi
paper or other media of non-standard width,
you can lower the amount of skew detected
or switch this function off. However, if you
switch this function Off, you could cause a
paper jam if the sheet is not loaded perfectly
straight.
Important
z If media is set at a skewed angle while Off,
this could cause jams or fouling the platen.
Width Detection On*, Off, Media Size? The Width Detection function can be
switched to Off only when printing on cut
sheets. You can switch width detection off for
Japanese washi or other media of non-
standard widths. If you switch this function
Off, then Media Size? is displayed and you
can enter the width of the media.
Return Defaults No, Yes This function restores the media type
settings to their default values.
ChangeBkInkType No, Yes You can switch the black ink tanks based on
the requirements of the print job for different
types of black ink.
Rep. Ink Tank No, Yes When you must change an ink tank during a
print job, the required processing is done so
you can change the ink tank. This menu is
displayed during printing only.
Adjust Printer
Auto Head Adj. Adjusts the printhead. (→ P.4- 4 0)
Advanced Adj. No, Yes Prints the pattern used to adjust nozzle
gaps, print direction, and color gaps; the
printer reads the printed pattern and does
the adjustments automatically based on the
results of the printout.
Menu Item Setting Values Function