Filter
Top Products
5- 38
NetWare Settings (Windows)
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Setting Up the Print Server With
NWADMIN, PCONSOLE
z If You Are Using NDS Queue Server Mode or
Remote Printer Mode
1
Log into NetWare as the System
Administrator, or as a user with equivalent
access rights, then start NWADMIN.
2
Execute the Quick Setup.
Select
Print Services Quick Setup
from the
Tools
menu.
Enter a
Print Server Name
of your choice. If you
want to use an existing server, click the button to
the right of the name to select it from the list.
For the printer
Name
enter the desired name.
If you intend to use Queue Server Mode, select
Other/Unknown
for the
Type
. If you intend to use
the Remote Printer Mode, select
Parallel
for
Type
, click the
Communicate
button then select
LPT1
for
Port
and
Manual Load
for
Connection
Type
.
For the print queue
Name
enter the desired name.
For
Volume
enter the volume object to create the
queue (the object that appears as the physical
volume on the network). Click the button on the
right to select from the list.
Perform any other settings that are required, then
click the
OK
button.
Note
z You are going to need the name of the print server to
perform the printer protocol settings so be sure to note
the printer name.
z When you perform the Quick Setup, “0” is assigned to
the printer as its number. If you intend to use the
Queue Server Mode, do not change the printer
number.
3
Set the password.
Select the print server created in Step 2, then
right-click Details.
Click the Change Password button to open the
password entry screen, then enter the desired
password.
Click the OK button to close the password entry
screen.
Click the OK or Cancel button to close the
Details screen.
4
Follow the procedure below to start the print
server when you use the Remote Printer
Mode.
To use the NetWare file server as the print
server, on the file server enter LOAD
PSERVER.NLM then press the Enter key.