Filter
Top Products
4- 14
Cleaning the Paper Restraint
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Cleaning the Paper Restraint
To maintain the proper use of the printer, use a piece of
plain paper to clean the back surface of the paper pressure
plate when you see the print surface or back surface of
media fouled with ink, especially before switching from a
small roll size to a larger size, or once a month.
Before starting this procedure, prepare some plain paper
(or any media other than film).
Important
z The paper you use for cleaning should be plain paper
that does not easily produce cutting dust. If you use
film or any type of media that produces cutting dust
that could hang up, this could lower the print quality.
1
Hold down the Power button for more than 1
sec. to display Shut Down.. and switch the
printer off.
2
Disconnect the power cord at the power
supply.
3
Push the release lever back to open it, fold a
sheet of plain paper (a) 2 or 3 times, insert it
from the back of the printer so it is under the
paper restraint (b), then use the paper to
clean the under side of the plate.
Be sure to wipe clean the entire length of the paper
restraint. When you are finished, pull the release
lever to the front to close it.
Shut Down..
Please Wait..
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
a
b