Filter
Top Products
1- 16
Function Menus
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
z MAIN MENU
z Sub Menus (Information Button)
Date Format
Chng Head Hght
Time Zone
IP Address
DHCP
BOOTP
RARP
MAIN MENU
Head Cleaning A
Drying_Time
Scan Wait Time
NearEnd RllMrgn
Far End RllMrgn
Media Thickness
VacuumStrngth
Standard Cutter
Cut Speed
CutDustReduct.
Correct Smear
Skew Check Lv.
Width Detection
Return Defaults
Advanced Adj.
Standard Adj.
Auto Print
Standard Adj.
Advanced Adj.
Fine Tuning
TCP/IP
IP Mode
Protocol
IP Setting
NetWare
Frame Type
Print Service
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Buzzer
Head Ht. Wrning
Subnet Mask
Default G/W
Head Cleaning B
(Media Type)
Auto Head Adj.
Feed Priority
Adjust Band
Adjust Length
Color Calib.
EOP Timer
TCP/IP
NetWare
AppleTalk
Ethernet Driver
Init. Settings
Replace P.head
Move Printer
Warning
Head Cleaning
Force Cutting
Media Type
Med.Detail Set.
ChangeBkInkType
Rep. Ink Tank
Adjust Printer
Interface Setup
Maintenance
System Setup
Med.type Wrning
Return Defaults
Color Calib. PM
Color Calib. PC
Color Calib. Y
Color Calib. M
Color Calib. C
Color Calib. K
Online
Test Print
Information
Status Print
Media Details
Print Job Log
Menu Map
Nozzle Check
Version
RAM
Ext. Interface
MAC Address
Error Log
Job Log
Counter
Bk Ink Tank
PC Ink Tank
C Ink Tank
PM Ink Tank
M Ink Tank
Y Ink Tank
Document Name
User Name
Page Count
Job Status
Print Start Time
Print End Time
Print Time
Print Size
Media Type
Interface
Coverage
Cut Count
Change Cutter
Keep Media Size
Chk Remain.Roll
Roll Length Set
Nozzle Check
Stop Ink Check
Sleep Timer
Use Power Save
Length Unit
Language
Reset MediaType
*1 *3*2
*7
*2*2*6
*5*4
*6 *6 *6 *6
*8
*1 Displayed only when media is loaded.
*2
Not displayed during maintenance cartridge warning.
*3 Displayed only during printing.
*4
Displayed only when Band Joint is selected as the Feed Priority.
*5
Displayed only when Print Length is selected as the Feed Priority.
*6 Displayed only when Network board is installed.
*7
Displayed only when Automatic is selected as the IP Mode.
*8
Displayed only when Manual is selected as the IP Mode.
Information
SUB MENU
Width :
(
Paper Width
)
(
Media Type
)
Remaining :
(
Paper Remaining
)
m
## Printable
Head Height
(
L/M/H
)
Best Head Hght
(
L/M/H
)