Filter
Top Products
2- 32
Printing with Rolls
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Selecting the Media Type
When you are using the printer with media loaded, you
must use the printer operation panel to select the type of
media loaded. If the type of print media is not suitable,
you may not be able to achieve the desired results. Fol-
low the procedure below if the media type selection does
not match the type of media loaded in the printer.
1
Press the Online button to display MAIN
MENU.
2
Press [] or [] to select Media Type,
then press [
].
3
Press [] or [] to select the name of the
media type then press OK.
An equals sign (=) displays on the left to indicate the
media type is set.
Important
z In order to achieve the best printing results with this
printer, the amount of feed is fine adjusted for each
type of media. For this reason, the image size,
margins, and other settings change for each media
type.
z When you select another media type, you should also
adjust the feed amount (→ P. 4- 4 2 ) and “Adjusting the
Height of the Printhead” (→ P.2-40).
MAIN MENU
Media Type ↓
Media Type
HW Coated
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)