Filter
Top Products
TELEDYNE API
M703E Dynamic Dilution Calibrator Operator’s Manual Optional Hardware and Software
5. OPTIONAL HARDWARE AND SOFTWARE
This includes a brief description of the hardware and software options available for the M703E Photometric
Calibrator. For assistance with ordering these options, please contact the Sales department of Teledyne –
Advanced Pollution Instruments at:
TOLL-FREE: 800-324-5190
FAX: 858-657-9816
TEL: 858-657-9800
E-MAIL: api-sales@teledyne.com
WEB SITE: www.teledyne-api.com
5.1. CARRYING STRAP HANDLE (OPT 29)
The chassis of the M703E calibrator allows to attach a strap handle for carrying the instrument (Figure 5-). The
handle is located on the right side and pulls out to accommodate a hand for transport. When pushed in, the
handle is nearly flush with the chassis, only protruding out about 9 mm (3/8”).
Figure 5-1: M703E with Carrying Strap Handle and Rack Mount Brackets
Installing the strap handle prevents the use of the rack mount slides, although the rack mount brackets, Option
21, can still be used.
CAUTION
A FULLY LOADED M703E WITH BOTH THE O
3
GENERATOR AND PHOTOMETER
OPTIONS INSTALLED WEIGHS ABOUT 16.3 KG (36 POUNDS).
TO AVOID PERSONAL INJURY WE RECOMMEND TWO PERSONS LIFT AND CARRY
THE CALIBRATOR.
MAKE SURE TO DISCONNECT ALL CABLES AND TUBING FROM THE CALIBRATOR
BEFORE CARRYING IT.
05744 Rev B 29