Filter
Top Products
TELEDYNE API
M703E Calibrator Operator’s Manual Safety Messages
SAFETY MESSAGES
Your safety and the safety of others are very important. We have provided many important safety messages in
this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is
associated with a safety alert symbol. These symbols are found in the manual and inside the M703E
Photometric O3 Calibrator. The definition of these symbols is described below:
GENERAL SAFETY HAZARD: Refer to the instructions for details on the specific
hazard.
CAUTION: Hot Surface Warning.
CAUTION: Electrical Shock Hazard.
TECHNICIAN SYMBOL: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
CAUTION
The M703E Photometric O3 Calibrator should only be used for the purpose and in the manner described
in this manual. If you use the M703E in a manner other than that for which it was intended,
unpredictable behavior could ensue with possible hazardous consequences.
NOTE
Technical Assistance regarding the use and maintenance of the
M703E or any other Teledyne Instruments product
can be obtained by:
Contacting Teledyne Instruments’ Customer Service Department at 800-324-5190
or
Via the internet at http://www.teledyne-api.com/forms
05744 Rev B i