Filter
Top Products
TELEDYNE API
M703E Calibrator Operator’s Manual Operating the M703E Calibrator
6. OPERATING THE M703E CALIBRATOR
The M703E calibrator is a computer-controlled calibrator with a dynamic menu interface for easy and yet
powerful and flexible operation. All major operations are controlled from the front panel display and keyboard
through these user-friendly menus.
To assist in navigating the system’s software, a series of menu trees can be found in Appendix A of this manual.
NOTE
The flowcharts in this chapter depict the manner in which the front panel display/keyboard interface is
used to operate the M703E Photometric Calibrator.
They depict typical representations of the display during the various operations being described.
They are not intended to be exact and may differ slightly from the actual display of your system.
NOTE
When editing values in the software, the ENTR key may disappear if you select a value that is invalid or
out of the allowable range for that parameter (e.g. such as trying to set the 24-hour clock to 25:00:00).
Once you adjust the setting to an allowable value, the ENTR key will re-appear.
05744 Rev B 35