Filter
Top Products
TELEDYNE API
Optional Hardware and Software M703E Dynamic Dilution Calibrator Operator’s Manual
32 05744 Rev B
5.2.5. ETHERNET + MULTIDROP (OPT 64)
This option allows the instrument to communicate on both RS-232 and ETHERNET networks simultaneously. It
includes the following:
RS232 MODEM CABLES (OPT 60A)
ETHERNET CABLE (OPT 60B)
RS-232 MULTIDROP (OPT 62)
ETHERNET (OPT 63
5.3. ADDITIONAL MANUAL (OPT 70)
Additional copies of the printed user’s manual can be purchased from the factory. Please specify the serial
number of your calibrator so that we can match the manual version.
This operator’s manual is also available on CD. The electronic document is stored in Adobe Systems Inc.
Portable Document Format (PDF) and is viewable with Adobe Acrobat Reader
®
software, which can be
downloaded for free at http://www.adobe.com/
The elec
tronic version of this manual can also be downloaded free at http://www.teledyne-api.com/manuals/.
Note that the online version is optimized
for fast download and may not print with the same quality as the manual
on CD.
5.4. EXTENDED WARRANTY (OPT 92)
An extended, two-year warranty is available for the M703E calibrator. This option must be specified upon
ordering the calibrator.
5.5. NIST TRACEABLE, PRIMARY STANDARD CERTIFICATION
The Model 703E can be used as a Primary Ozone Standard. For this application the performance of the M703E
Photometric Calibrator calibrated to Standard Reference Photometer (SRP)
Calibrators ordered with this option are verified and validated in accordance with the procedures prescribed by
the U.S. Environmental Protection Agency (EPA) under Title 40 of the Code of Federal Regulations, Part 50,
Appendix D (40 CFR Part 50).
An NIST traceable Certificate of Calibration and accompanies the instrument.
USER NOTES: