Filter
Top Products
I ENGLISH I
Preparation
BatteryLevel Display
+ The battery level display indicatesthe amount of power remaining inthe Batterypack.
a. Fully charged
b. 20-40% used
c. 40-80% used
d. 80-95% used
e. Completely used (Blinking)
(TheCamcorder will turn off soon, change the batteryas soon as possible)
Tips for battery Identification
m a
m b
c
$
$
e
(BHnk(ng)
<Camcerder Mode>
[ Notes ]
• Please refer to the Table on page 24 for approximate continuous recording time.
• The recording time is affected by temperature and environmental conditions.
• The recording time shortens dramatically in a cold environment,
The continuous recording times in the operating instructions are measured using a fully charged
Battery pack at 77 °F (25 °C). As the environmental temperature and conditions vary,
The remaining battery time may differ from the approximate continuous recording times given in
the instructions.
m b
$
c
d
e
(BUnk(rig)
<Camera Mode>
Turning OSD on/off
Pressthe DISPLAY buttonon the left side controlpanel.
Each pressof the button toggles the OSD function on and off.
When you turn the OSD off,
In REC Mode: The STBY, REC modes are alwaysdisplayed on the OSD, even whenthe OSD isturned off and the key
input is displayedfor 3 seconds thenturned off.
In PLAYMode: When you press any function button,the function is displayed on the OSD for 3 seconds before it turns
off.
Turning the Date/Timeon/off
Toturn the Date/Time on or off, access the menu and change the Date/Timemode. (seepage 35)