Filter
Top Products
[ ENGLISH ]
The Camcorder : Playback
+ The Playbackfunction works only in PLAYmode.
Playback on the LCD Screen
+ Itis practical to view a tape using the LCD screen when in acar or outdoors.
Playback on aTV Monitor
+ Toplay back a tape, the television must be NTSCcompatible. (seepage 146)
+ We recommend that you use the AC Poweradapter as the power sourcefor the Camcorder.
Connecting to a TV which has Audio/VideoInput Jacks
1. Connectthe Camcorderto your TV withthe Multi-AV cable.
• The yellowjack: Video
• The whitejack: Audio(L)-mono
• The redjack: Audio(R)
If you connect to a monaural TV,connect theyellow jack (Video)
to the video input of the TV and the whitejack (Audio L) tothe audio input
of the TV.
2. Set the Power switchto PLAY.
3. Turn on the TV and setthe TV/VIDEO selector on the TV to Video.
• Refer tothe TVuser's manual.
4. Playthe tape.
[ Notes ]
• You may use an S-Video cable to obtain better quality pictures if you have a S-Video jack on your TV.
• Even ifyou use an S-Video cable, you need to connect an audio cable.
• If you connect the cable to the AV/S-Video jack, you will not hear sound from the Camcorder's speakers.
• If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).