Filter
Top Products
CHAPTER 12: COMMAND LINE INTERFACE 101
CLI Prompts
The Command Line Interface prompt indicates the current command level. The root portion of
the prompt is the login name; admin is the root portion in the following command:
admin > Config > Port >
CLI Commands
Table 4 lists and describes all available CLI commands.
Table 4 Available CLI Commands
COMMAND DESCRIPTION
backup
System command to backup the console server settings
cleareventlog
Clears the contents of the local event log
config
Port configuration command
Switch to the Configuration menu.
connect
Connect to a port.
diagnostics
Switch to diagnostic commands menu.
encryption
Select the encryption method for HTTPS.
eventlogfile
Controls and configures the local event log.
eventsyslog
Controls system event logging.
factory_reset
System command to reset to the factory settings.
firmware
System command to display the versions of the firmware.
help
Display an overview of the CLI syntax.
history
Display the current session's command line history.
http
Enable http connections.
ifconfig
Show detailed network configuration.
interface
Configure the DSX network interface.
ipmi
IPMI Configuration commands.
listports
List accessible ports.
Kerberos
Kerberos based Network Authentication
ldap
LDAP Configuration .
localauthentication
Local Authentication Configuration .
logout
Logout of the current CLI session.
maintenance
Switch to System Maintenance commands.
netstat
Print network connections
nfsget
Generates an encryption key.
nfssetkey
Enables encryption of log data.
password
Set the current user's password.
ping
Ping a remote system.
portlog
Enables and configures the logging of port data.
ps
Report system process status
quit
Return to previous command
radius
Switch to the RADIUS Configuration menu.
reboot
System command to reboot the system.
restore
System command to restore the system