Filter
Top Products
CHAPTER 9: LOGGING 77
Note: The NFS server must have the exported directory with write permission for the port
logging to work.
To configure NFS Logging:
1. Click the Setup tab, and then click NFS. The NFS Settings screen appears.
Figure 72 NFS Settings Screen
2. Click the Enable NFS checkbox to enable NFS logging.
3. Type the IP address of the NFS server in the Primary IP field, and then enter the path to the
log file in the Primary Directory field.
4. If you have a backup NFS server, enter the same information for this server in the Secondary
IP field and Secondary Directory fields. If the primary server fails, port logging is
redirected to the secondary server.
5. Click OK.